Introduction to DI-15 deionized water system
DI-18 deionized water system is used to produce high quality deionized pure water.The product water meet the requirement of ASTM Type I standard. Water resistivity up to 18.25MΩ.CM. It is well welcomed by morden laboratory who need consume much deionized water or ultra pure water. It adop 6 stage filtering process. Word advanced RO membrane as the insturance before deionzing process.
This water purification system has incorporated new cutting-edge technology. It is installed and used easily, and canprovide you with RO water and deionized water for science research. So, it will benefit your work.For the water purification system’s maximum efficiency. it is suggested that the user manual be read beforeinstallation. Any question in the installation process, please contact our technology engineers or dealers.
Parameter of DI-15 deionized water system
| Model | DI-15 | DI-30 | DI-45 | DI-60 | |||
| Output(25℃)* | 15 liters/hour | 30 liters/hour | 45 liters/hour | 60 liters/hour | |||
| Pure water outlet | One deionized water and one reverse osmosis water | ||||||
| Deionized water quality | |||||||
| Resistivity | 15-18.2MΩ.cm | ||||||
| Particle(>0.1μm) | N/A | N/A | N/A | N/A | |||
| RO water quality | |||||||
| Ion rejection rate | 96%-99% (new RO membrane) | ||||||
| Organic rejection rate | >99%, when MW>200 Dalton | ||||||
| Particles rejection rate | >99% | ||||||
| Feed water requirements | Tap water, temperature:5-45℃,pressure:1.0-4.0Kgf/cm2 | ||||||
| Electrical requirements | AC110-240V, 50/60Hz | ||||||
| Power | 55W | 60W | 70W | 78W | |||
Application of deionized water system
1.Laboratory water
The main purpose of laboratory water is to conduct various experiments, including atomic spectroscopy, high-performance liquid chromatography, ultrapure substance analysis, trace substances, etc.
2.pharmacy
Ultra pure water can be used in pharmaceuticals to prepare drugs, wash equipment, and manufacture biological products, as its high purity can avoid the impact of impurities on drugs and biological products, while also ensuring the purity and stability of drugs.
3.Mass spectrometry analysis
Mass spectrometry analysis is one of the uses of ultrapure water because it can perform trace analysis on mixtures and requires high purity. In addition to mass spectrometry analysis, ultrapure water can also be used for other applications. Such as solid-phase extraction and surface analysis.
4.Plasma mass spectrometry
Plasma mass spectrometry (ICP-MS) can be used to determine the content and purity of the tested elements. It is of great help to plasma mass spectrometry analysis work.
Pictures of deionized water system
