Introduction to AIR-2000 lab air compressor
The AIR-2000 laboratory air compressor is designed to provide clean, dry and pure compressed air for laboratory equipment, primarily for applications such as gas chromatography, nitrogen purging, and inert gas supply. Due to the extremely high purity requirements of laboratory instruments, it use an silent compressor or gas processed through an filters.
Features of AIR-2000 lab air compressor
1.Turn on the switch to generate gas, safe and reliable
2.Low noise and strong purification capacity
3.System three-stage filtration (oil-free)
4.Equipped with an overpressure and overheat protection device
5.Good pressure stability
6.Impact-resistant and anti-aging filter
7.Automatic drainage of stainless steel gas storage tank system
8.The entire gas circuit is constructed from high-quality stainless steel
9.It can be used continuously for 24 hours
10.It can be used as a matching accessory for gas chromatographs produced by any manufacturer and of any model, both domestically and internationally
Parameter of AIR-2000 lab air compressor
| Model | AIR-2000 | AIR-5000 |
| Output flow(ml/min) | 0-2000 | 0-5000 |
| Work pressure(Mpa) | 0.4 | 0.4 |
| system pressure(Mpa) | 0.55-0.75 | 0.55-0.75 |
| Voltage | AC 200-240v,50Hz | AC 200-240v,50Hz |
| Pressure stability(Mpa) | 0.003 | 0.003 |
| Enviroment temperature（℃） | 5-40 | 5-40 |
| Power(w) | 150 | 175 |
| Dimension(mm) | 450*260*300 | 450*260*300 |
| Weight(kg) | 20 | 22 |
The AIR-2000 Air Compressor is designed and engineered specifically to provide a dedicated, fully integrated compressed air source for gas chromatography,Nitrogen and Zero Air gas generators. Housed within the same compact factor as the generators. the Air Compressor give you a complete self-contained GC gas solution, even where no house supply is available.
The lab Air Compressor also benefits from low noise and vibration making it relatively quiet in operation within a typical laboratory.